ST-5D A/B Scan Ultrasonic Color Waveform Penetrat Coating Thickness Gauge

TG-26 Multi-mode Gauge TG-22

TG 26 Ultrasonic thickness gauge 超聲波測厚儀

ULTRASONIC THICKNESS GAUGE SUPPLIERS
Thickness Gauge
Gauge Description:
Ultrasonic thickness gauge suppliers. Ex-Stock Singapore - Immediate Delivery. Used to measure wall thickness, sheet metal or plastic thickness.
Standard and E-E (Echo to Echo) Ex-stock. Ability to measure the actual thickness through paint materials.
For more information on how to use the TG-22 (standard gauge) and TG-26 (high precision multi-mode, please request a quotation and manual. This standard type ultrasonic thickness gauge and multi-mode gauges are also available for special applications with optional transducers.
For a coating thickness gauge, paint thickness gage and thin film coating gauges, please specifically mention in your request that the application is for coating thickness and not our standard thickness gauges of multi-mode gauges.
The EESIFLO TG-22 is an easy to use standard industrial type ultrasonic thickness gauge. It uses the transit time ultrasonic wave propagation principle to measure the thickness of materials of several types including metals, plastics or any sonically conductive materials. The probe acts as a sender and receiver of an ultrasonic signal and an internal counter calculates the time taken for the signals sending and receiving through the solid being measured. The EES TG-22 can be set at different acoustic velocities depending on the material being measured. The instruction book includes a table of acoustic velocities for some of the commonly used materials. In the absence of the acoustic velocity of the material being measured, it is still possible to measure materials of this kind if a representative sample is available of a known thickness.
Features:
High measuring range 1.2 mm…230.0mm (Steel)
Built in calibration test block
Small and light weight . Data logging capable
Metric & imperial versions available (switchable setting)
Easy operation . Aluminium Casing.
Typical Applications:
Access wall thickness of material due to corrosion.
Wall thickness measurements of hard materials, piping, sheet metal, construction materials
Hull plates and metallic surfaces
General inspection of metals including steel, cast iron,
Thickness of  aluminium, copper, brass, titanium sheet metal, tanks, ship metal, ship hull
Inspection of piping systems
Inspection of glass, ceramics and hard plastics
Resolution: 0.1mm
Display: 4 digit LCD
Accuracy: ±0.05mm (below 10mm) 0.1mm above 10mm.
Battery: Two AA sized cells.
Probe Operating temperature: 0…50 °C
Calibration block:
Auto Power Off:
Operating 100 hours without backlight on.
Weight 1.5 kg
Demonstrations /Instructions on how to operate our ultrasonic thickness gauges are available in Singapore.
Other thickness gauge applications include:
Check for corrosion on ship structures including shell plates and bulkheads
Preventative maintenance and quality checks for bridges , street lighting and steel columns
Metal thickness monitoring on cranes, marine vessels, marine structures and conveying systems
Metal thickness safety checks on steam and pressurised water systems, transportable gas containers and compressed air systems
Quality assurance metal thickness checks
Wall thickness and corrosion monitoring of storage tanks, process vessels and road tankers