Q-RACK 戶外曝曬架測試標準

作者：admina來源：時間：2020-10-14 10:45:34瀏覽量：1092人閱讀

Q-RACK 戶外曝曬架測試標準

ASTM C1589

Standard Practice for Outdoor Weathering of Construction Seals and Sealants

This practice describes outdoor exposure procedures used to determine the weathering durability of building construction, seals and sealants.

ASTM C1589

建筑密封件和密封劑戶外老化的標準測試方法

本測試方法描述了用于測定建筑結構密封件和密封劑老化耐候性的戶外曝露測試程序。

ASTM D1006

Standard Practice for Conducting Exterior Exposure Tests of Paints on Wood

This practice covers procedures to be followed for direct exposure of house and trim paints on new, previously unpainted wood materials to the environment.

ASTM D1006

木器涂料外觀曝露測試的標準測試方法

本測試方法規定了對房屋和新的、以前未上漆的木質材料上的裝飾涂料直接曝露在環境中要遵循的程序。

ASTM D1014

Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates

This practice covers procedures to be followed for direct exposure of exterior paints and coatings to the environment when applied to metal surfaces.

ASTM D1014

金屬底板上油漆和涂料外觀曝露測試的標準測試方法

本測試方法規定了對用于金屬表面的外部油漆和涂料直接曝露在環境中要遵循的程序。

ASTM D1435

Standard Practice for Outdoor Weathering of Plastics

This practice is intended to cover procedures for the exposure of plastic materials to weather. Note 1See Practice G 24 for aging under glass.

ASTM D1435

塑料戶外老化標準測試方法

本測試方法旨在規定塑料材料進行曝露老化測試的程序。請參見測試方法 G 24 玻璃下老化現象。

ASTM D3456

Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack

This practice provides guidelines for determining the susceptibility of paint films to microbiological attack on exterior exposure. While it is recognized that various organisms may occur on an exposed coating, the specific types of organisms are mainly of academic interest. The degree to which microbiological discoloration occurs is the primary concern.

ASTM D3456

漆膜對微生物攻擊的敏感性的外部曝露測定的標準測試方法

本指南對測定曝露在外部的漆膜受微生物攻擊的影響提供指導。雖然人們認識到，曝露的涂層上可能會出現各種生物體，但研究的重點主要集中在特定類型的生物體上。在微生物變色的程度是首要關注的問題。

ASTM D3679

Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding

This specification establishes requirements and test methods for the materials, dimensions, warp, shrinkage, impact strength, expansion, appearance, and windload resistance of extruded single-wall siding manufactured from rigid (unplasticized) PVC compound. Methods of indicating compliance with this specification are also provided.

ASTM D3679

硬性聚氯乙烯（PVC）墻板標準規范

本規范規定了對擠壓單壁壁板的要求和測試方法，包括材料、尺寸、翹曲、收縮、沖擊強度、膨脹、外觀和風阻，壁板由剛性（未增塑）PVC復合物制造而成。還提供了表明符合本規范的方法。

ASTM D5970

Standard Test Method for Deterioration of Geotextiles from Outdoor Exposure

This test method covers evaluating the deterioration in tensile strength and strain after outdoor exposure.

ASTM D5970

土工布戶外曝曬老化的標準測試方法

該測試方法規定了戶外曝露后的拉伸強度和應變退化的評估。

ASTM G7

Standard Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials

This practice covers procedures to be followed for direct exposure of nonmetallic materials to the environment. When originators of a weathering test have the actual exposure conducted by a separate agency, the specific conditions for the exposure of test and control specimens must be clearly defined and mutually agreed upon between all parties.